###############################################################################
## Copyright(c) Oracle Corporation 1998, 2013. All rights reserved.           ##
##                                                                           ##
## Specify values for the variables listed below to customize                ##
## your installation.                                                        ##
##                                                                           ##
## Each variable is associated with a comment. The comment                   ##
## can help to populate the variables with the appropriate                   ##
## values.							             ##
##                                                                           ##
## IMPORTANT NOTE: This file contains plain text passwords and               ##
## should be secured to have read permission only by oracle user             ##
## or db administrator who owns this installation.                           ##
##                                                                           ##
###############################################################################


###############################################################################
##                                                                           ##
## Instructions to fill this response file                                   ##
## To install and configure 'Grid Infrastructure for Cluster'                ##
##  - Fill out sections A,B,C,D,E,F and G                                    ##
##  - Fill out section G if OCR and voting disk should be placed on ASM      ##
##                                                                           ##
## To install and configure 'Grid Infrastructure for Standalone server'      ##
##  - Fill out sections A,B and G                                            ##
##                                                                           ##
## To install software for 'Grid Infrastructure'                             ##
##  - Fill out sections A,B and C                                            ##
##                                                                           ##
## To upgrade clusterware and/or Automatic storage management of earlier     ##
## releases                                                                  ##
##  - Fill out sections A,B,C,D and H                                        ##
##                                                                           ##
###############################################################################

#------------------------------------------------------------------------------
# Do not change the following system generated value. 
#------------------------------------------------------------------------------
oracle.install.responseFileVersion=/oracle/install/rspfmt_crsinstall_response_schema_v11_2_0

###############################################################################
#                                                                             #
#                          SECTION A - BASIC                                  #
#                                                                             #
###############################################################################

#-------------------------------------------------------------------------------
# Specify the hostname of the system as set during the install. It can be used
# to force the installation to use an alternative hostname rather than using the
# first hostname found on the system. (e.g., for systems with multiple hostnames 
# and network interfaces)
#-------------------------------------------------------------------------------
ORACLE_HOSTNAME={{ ansible_hostname }}
#-------------------------------------------------------------------------------
# Specify the location which holds the inventory files.
# This is an optional parameter if installing on  
# Windows based Operating System.
#-------------------------------------------------------------------------------
# INVENTORY_LOCATION=/u01/app/oraInventory
INVENTORY_LOCATION={{ oracle_inventory_loc }}
#-------------------------------------------------------------------------------
# Specify the languages in which the components will be installed.             
# 
# en   : English                  ja   : Japanese                  
# fr   : French                   ko   : Korean                    
# ar   : Arabic                   es   : Latin American Spanish    
# bn   : Bengali                  lv   : Latvian                   
# pt_BR: Brazilian Portuguese     lt   : Lithuanian                
# bg   : Bulgarian                ms   : Malay                     
# fr_CA: Canadian French          es_MX: Mexican Spanish           
# ca   : Catalan                  no   : Norwegian                 
# hr   : Croatian                 pl   : Polish                    
# cs   : Czech                    pt   : Portuguese                
# da   : Danish                   ro   : Romanian                  
# nl   : Dutch                    ru   : Russian                   
# ar_EG: Egyptian                 zh_CN: Simplified Chinese        
# en_GB: English (Great Britain)  sk   : Slovak                    
# et   : Estonian                 sl   : Slovenian                 
# fi   : Finnish                  es_ES: Spanish                   
# de   : German                   sv   : Swedish                   
# el   : Greek                    th   : Thai                      
# iw   : Hebrew                   zh_TW: Traditional Chinese       
# hu   : Hungarian                tr   : Turkish                   
# is   : Icelandic                uk   : Ukrainian                 
# in   : Indonesian               vi   : Vietnamese                
# it   : Italian                                                   
#
# all_langs   : All languages
#
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
#
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs  
#-------------------------------------------------------------------------------
SELECTED_LANGUAGES=en,fr,fr_CA

#-------------------------------------------------------------------------------
# Specify the installation option.
# Allowed values: CRS_CONFIG or HA_CONFIG or UPGRADE or CRS_SWONLY
#   - CRS_CONFIG : To configure Grid Infrastructure for cluster
#   - HA_CONFIG  : To configure Grid Infrastructure for stand alone server
#   - UPGRADE    : To upgrade clusterware software of earlier release
#   - CRS_SWONLY : To install clusterware files only (can be configured for cluster 
#                or stand alone server later)
#-------------------------------------------------------------------------------
oracle.install.option=CRS_SWONLY

#-------------------------------------------------------------------------------
# Specify the complete path of the Oracle Base.
#-------------------------------------------------------------------------------

#ORACLE_BASE=/u01/app/grid
ORACLE_BASE={{ oracle_racine }}/{{ gi_user }}

#-------------------------------------------------------------------------------
# Specify the complete path of the Oracle Home.
#-------------------------------------------------------------------------------
#ORACLE_HOME=/u01/app/11.2.0/grid
ORACLE_HOME={{ gi_home }}

################################################################################
#                                                                              #
#                              SECTION B - GROUPS                              #
#                                                                              #
#   The following three groups need to be assigned for all GI installations.   #
#   OSDBA and OSOPER can be the same or different.  OSASM must be different    #
#   than the other two.                                                        #
#   The value to be specified for OSDBA, OSOPER and OSASM group is only for    #
#   Unix based Operating System.                                               #
#                                                                              #
################################################################################
#-------------------------------------------------------------------------------
# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
#-------------------------------------------------------------------------------
#oracle.install.asm.OSDBA=asmdba
oracle.install.asm.OSDBA={{ asmdba_group }}

#-------------------------------------------------------------------------------
# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
# The value to be specified for OSOPER group is optional.
#-------------------------------------------------------------------------------
#oracle.install.asm.OSOPER=asmoper
oracle.install.asm.OSOPER={{ asmoper_group }}

#-------------------------------------------------------------------------------
# The OSASM_GROUP is the OS group which is to be granted OSASM privileges. This
# must be different than the previous two.
#-------------------------------------------------------------------------------
#oracle.install.asm.OSASM=asmadmin
oracle.install.asm.OSASM={{ asmadmin_group }}

################################################################################
#                                                                              #
#                           SECTION C - SCAN                                   #
#                                                                              #
################################################################################
#-------------------------------------------------------------------------------
# Specify a name for SCAN
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.scanName=

#-------------------------------------------------------------------------------
# Specify a unused port number for SCAN service
#-------------------------------------------------------------------------------

oracle.install.crs.config.gpnp.scanPort=
  

################################################################################
#                                                                              #
#                           SECTION D - CLUSTER & GNS                      #
#                                                                              #
################################################################################
#-------------------------------------------------------------------------------
# Specify a name for the Cluster you are creating.
#
# The maximum length allowed for clustername is 15 characters. The name can be 
# any combination of lower and uppercase alphabets (A - Z), (0 - 9), hyphen(-)
# and underscore(_).
#-------------------------------------------------------------------------------
oracle.install.crs.config.clusterName=

#-------------------------------------------------------------------------------
# Specify 'true' if you would like to configure Grid Naming Service(GNS), else
# specify 'false'
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.configureGNS=false

#-------------------------------------------------------------------------------
# Applicable only if you choose to configure GNS
# Specify the GNS subdomain and an unused virtual hostname for GNS service
# Additionally you may also specify if VIPs have to be autoconfigured
#
# Value for oracle.install.crs.config.autoConfigureClusterNodeVIP should be true
# if GNS is being configured(oracle.install.crs.config.gpnp.configureGNS), false
# otherwise.
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.gnsSubDomain=
oracle.install.crs.config.gpnp.gnsVIPAddress=
oracle.install.crs.config.autoConfigureClusterNodeVIP=false

#-------------------------------------------------------------------------------
# Specify a list of public node names, and virtual hostnames that have to be 
# part of the cluster.
#
# The list should a comma-separated list of nodes.  Each entry in the list 
# should be a colon-separated string that contains 2 fields.
#
# The fields should be ordered as follows:
# 1. The first field is for public node name.
# 2. The second field is for virtual host name
#    (specify as AUTO if you have chosen 'auto configure for VIP' 
#     i.e. autoConfigureClusterNodeVIP=true)
#
# Example: oracle.install.crs.config.clusterNodes=node1:node1-vip,node2:node2-vip
#-------------------------------------------------------------------------------
oracle.install.crs.config.clusterNodes=

#-------------------------------------------------------------------------------
# The value should be a comma separated strings where each string is as shown below
# InterfaceName:SubnetAddress:InterfaceType
# where InterfaceType can be either "1", "2", or "3"
# (1 indicates public, 2 indicates private, and 3 indicates the interface is not used)
#
# For example: eth0:140.87.24.0:1,eth1:10.2.1.0:2,eth2:140.87.52.0:3
#
#-------------------------------------------------------------------------------
oracle.install.crs.config.networkInterfaceList=

################################################################################
#                                                                              #
#                              SECTION E - STORAGE                             #
#                                                                              #
################################################################################

#-------------------------------------------------------------------------------
# Specify the type of storage to use for Oracle Cluster Registry(OCR) and Voting
# Disks files
#   - ASM_STORAGE
#   - FILE_SYSTEM_STORAGE 
#-------------------------------------------------------------------------------
oracle.install.crs.config.storageOption=


#-------------------------------------------------------------------------------
# THIS PROPERTY NEEDS TO BE FILLED ONLY IN CASE OF WINDOWS INSTALL. 
# Specify a comma separated list of strings where each string is as shown below:
# Disk Number:Partition Number:Drive Letter:Format Option
# The Disk Number and Partition Number should refer to the location which has to 
# be formatted. The Drive Letter should refer to the drive letter that has to be 
# assigned. "Format Option" can be either of the following -
#   - SOFTWARE : Format to place software binaries.
#   - DATA     : Format to place the OCR/VDSK files.
#
# For example: 1:2:P:DATA,1:3:Q:SOFTWARE,1:4:R:DATA,1:5:S:DATA
#
#------------------------------------------------------------------------------- 
oracle.install.crs.config.sharedFileSystemStorage.diskDriveMapping=

#-------------------------------------------------------------------------------
# These properties are applicable only if FILE_SYSTEM_STORAGE is chosen for 
# storing OCR and voting disk
# Specify the location(s) and redundancy for OCR and voting disks
# Multiple locations can be specified, separated by commas.
# In case of windows, mention the drive location that is specified to be
# formatted for DATA in the above property.
# Redundancy can be one of these:
#     EXTERNAL - one(1) location should be specified for OCR and voting disk
#     NORMAL - three(3) locations should be specified for OCR and voting disk
# Example:
#     For Unix based Operating System:
#     oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=/oradbocfs/storage/vdsk1,/oradbocfs/storage/vdsk2,/oradbocfs/storage/vdsk3
#     oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=/oradbocfs/storage/ocr1,/oradbocfs/storage/ocr2,/oradbocfs/storage/ocr3
#     For Windows based Operating System:
#     oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=P:\vdsk1,R:\vdsk2,S:\vdsk3
#     oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=P:\ocr1,R:\ocr2,S:\ocr3
#-------------------------------------------------------------------------------
oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=
oracle.install.crs.config.sharedFileSystemStorage.votingDiskRedundancy=NORMAL
oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=
oracle.install.crs.config.sharedFileSystemStorage.ocrRedundancy=NORMAL
               	
################################################################################
#                                                                              #
#                               SECTION F - IPMI                               #
#                                                                              #
################################################################################

#-------------------------------------------------------------------------------
# Specify 'true' if you would like to configure Intelligent Power Management interface
# (IPMI), else specify 'false'
#-------------------------------------------------------------------------------
oracle.install.crs.config.useIPMI=false

#-------------------------------------------------------------------------------
# Applicable only if you choose to configure IPMI
# i.e. oracle.install.crs.config.useIPMI=true
# Specify the username and password for using IPMI service
#-------------------------------------------------------------------------------
oracle.install.crs.config.ipmi.bmcUsername=
oracle.install.crs.config.ipmi.bmcPassword=

################################################################################
#                                                                              #
#                                SECTION G - ASM                               #
#                                                                              #
################################################################################
#-------------------------------------------------------------------------------
# Specify a password for SYSASM user of the ASM instance
#-------------------------------------------------------------------------------
oracle.install.asm.SYSASMPassword=

#-------------------------------------------------------------------------------
# The ASM DiskGroup
#
# Example: oracle.install.asm.diskGroup.name=data
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.name=DATA

#-------------------------------------------------------------------------------
# Redundancy level to be used by ASM.
# It can be one of the following  
#   - NORMAL
#   - HIGH
#   - EXTERNAL
# Example: oracle.install.asm.diskGroup.redundancy=NORMAL
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.redundancy=NORMAL

#-------------------------------------------------------------------------------
# Allocation unit size to be used by ASM.
# It can be one of the following values
#   - 1
#   - 2
#   - 4
#   - 8
#   - 16
#   - 32
#   - 64
# Example: oracle.install.asm.diskGroup.AUSize=4
# size unit is MB
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.AUSize=1


#-------------------------------------------------------------------------------
# List of disks to create a ASM DiskGroup
#
# Example:
#     For Unix based Operating System:
#     oracle.install.asm.diskGroup.disks=/oracle/asm/disk1,/oracle/asm/disk2
#     For Windows based Operating System:
#     oracle.install.asm.diskGroup.disks=\\.\ORCLDISKDATA0,\\.\ORCLDISKDATA1
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.disks=

#-------------------------------------------------------------------------------
# The disk discovery string to be used to discover the disks used create a ASM DiskGroup
#
# Example:
#     For Unix based Operating System:
#     oracle.install.asm.diskGroup.diskDiscoveryString=/oracle/asm/*
#     For Windows based Operating System:
#     oracle.install.asm.diskGroup.diskDiscoveryString=\\.\ORCLDISK*
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.diskDiscoveryString=

#-------------------------------------------------------------------------------
# oracle.install.asm.monitorPassword=password
#-------------------------------------------------------------------------------
oracle.install.asm.monitorPassword=

################################################################################
#                                                                              #
#                             SECTION H - UPGRADE                              #
#                                                                              #
################################################################################
#-------------------------------------------------------------------------------
# Specify nodes for Upgrade.
# For upgrade on Windows, installer overrides the value of this parameter to include
# all the nodes of the cluster. However, the stack is upgraded one node at a time. 
# Hence, this parameter may be left blank for Windows.
# Example: oracle.install.crs.upgrade.clusterNodes=node1,node2
#-------------------------------------------------------------------------------
oracle.install.crs.upgrade.clusterNodes=

#-------------------------------------------------------------------------------
# For RAC-ASM only. oracle.install.asm.upgradeASM=true/false
# Value should be 'true' while upgrading Cluster ASM of version 11gR2(11.2.0.1.0) and above
#-------------------------------------------------------------------------------
oracle.install.asm.upgradeASM=false
#------------------------------------------------------------------------------
# Specify the auto-updates option. It can be one of the following:
#   - MYORACLESUPPORT_DOWNLOAD
#   - OFFLINE_UPDATES
#   - SKIP_UPDATES
#------------------------------------------------------------------------------
oracle.installer.autoupdates.option=SKIP_UPDATES
#------------------------------------------------------------------------------
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates
# are present.
#------------------------------------------------------------------------------
oracle.installer.autoupdates.downloadUpdatesLoc=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username which has the patches download privileges  
# to be used for software updates.
#  Example   : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_USERNAME=

#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username password which has the patches download privileges  
# to be used for software updates.
#
# Example    : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

#------------------------------------------------------------------------------
# Specify the Proxy server name. Length should be greater than zero.
#
# Example    : PROXY_HOST=proxy.domain.com 
#------------------------------------------------------------------------------
PROXY_HOST=

#------------------------------------------------------------------------------
# Specify the proxy port number. Should be Numeric and at least 2 chars.
#
# Example    : PROXY_PORT=25 
#------------------------------------------------------------------------------
PROXY_PORT=0
#------------------------------------------------------------------------------
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD 
# blank if your proxy server requires no authentication.
#
# Example    : PROXY_USER=username 
#------------------------------------------------------------------------------
PROXY_USER=

#------------------------------------------------------------------------------
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD  
# blank if your proxy server requires no authentication.
#
# Example    : PROXY_PWD=password 
#------------------------------------------------------------------------------
PROXY_PWD=
#------------------------------------------------------------------------------
# Specify the proxy realm.
#
# Example    : PROXY_REALM=metalink
#------------------------------------------------------------------------------
PROXY_REALM=
